The Gemfan Hurricane 7050-3 is a 7-inch 3-blade polycarbonate propeller designed for long-range and freestyle FPV builds. Carrying Gemfan’s Hurricane design philosophy into the 7-inch class, the 7050-3 balances efficiency with responsive thrust delivery — giving 7-inch pilots a prop that works equally well for extended long-range cruising and more dynamic freestyle flying.
Why choose the Hurricane 7050-3?
7-inch builds demand more from propellers than 5-inch — longer blades at higher loads mean heat, vibration, and durability matter more. The Hurricane 7050-3’s polycarbonate construction handles the mechanical stress of 4-6S motor loads without becoming brittle, and the 3-blade design gives a better balance between thrust efficiency and motor braking response compared to 2-blade alternatives. Pair them with our flight controller and motor range for a complete 7-inch build.
Key features
7-inch diameter — built for long-range efficiency
The larger 7-inch blade diameter moves more air per revolution at lower RPM compared to 5-inch props — improving thrust efficiency and reducing motor load during sustained cruising, which directly extends flight time on long-range builds.
3-blade design — thrust and braking balance
Three blades give better thrust and braking response than 2-blade alternatives at the same diameter — more useful for dynamic 7-inch freestyle flying while still maintaining the efficiency advantage of the larger disk area.
5-inch pitch — efficiency optimised
The 5.0-inch pitch is tuned for efficiency across a wide throttle range — delivering strong mid-throttle thrust without excessive current draw, important for battery efficiency on long-range missions.
Polycarbonate construction
Polycarbonate props flex on impact rather than shattering, giving them better crash survivability than brittle alternatives. Light clips and minor impacts are less likely to result in a cracked or destroyed prop mid-session.
Specifications
| Specification | Detail | ||||
|---|---|---|---|---|---|
| Model | Hurricane 7050-3 | ||||
| Diameter | 7 inch (177mm) | ||||
| Pitch | 5.0 inch | ||||
| Blades | 3 | ||||
| Centre hole | 5mm | ||||
| Material | Polycarbonate (PC) | ||||
| Compatible motors | 2806 / 2807 / 3115 class, M5 shaft | ||||
| Pack contents | 4 props — 2x CW + 2x
1 Powered by The FPV Project Hey there! 🍕 🍕🍕 Welcome to The FPV Project!🦅 🦅 🦅 What can we help you with today? 👨🏼💻 Open chat |



Reviews
There are no reviews yet.