Flywoo Goku GM10 Pro V3 GPS Module with Compass: Unmatched Precision and Performance
Introduction
In the rapidly evolving world of FPV (First Person View) drone technology, the Flywoo Goku GM10 Pro V3 GPS Module with Compass stands out as a beacon of precision and reliability. Designed for drone enthusiasts who demand the highest level of accuracy and performance, this GPS module offers unparalleled features that make it a top choice for serious pilots.
Superior GPS Performance
The Flywoo Goku GM10 Pro V3 is equipped with state-of-the-art GPS technology that ensures rapid satellite acquisition and stable connectivity. This module supports multiple satellite systems, including GPS, GLONASS, and Galileo, providing comprehensive global coverage and reducing the time to first fix (TTFF) to mere seconds.
Key Features:
- Multi-Constellation Support: Enhanced accuracy and reliability with support for GPS, GLONASS, and Galileo.
- High Update Rate: Up to 10Hz refresh rate for real-time data.
- Low Power Consumption: Efficient design that conserves battery life.
The Flywoo GOKU GM10 Pro V3 GPS Module with a compass and more accurate positioning and faster Star Search. It features the latest M10050 GNSS Chip. The Flywoo GOKU GM10 Pro V3 GPS Module features 72 searching channels and searches up to 30+ satellites for improved speed.
VIDEO: DJI O3 Air Unit / FLYWOO GM10 V3 GPS Series test
Features
- 1.0mm spacing between the 6pins patch seat
- GPS Module, Three Module Compass
- 72 searching channels
- Accurate positioning
- Up to 30+ satellites
- M10050 GNSS Chip
- Faster Star Search
Specifications
- Receiving Format: GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS
- Frequency: GPS L1, GLONASS L1, BeiDou B1, SBAS L1, Galileo E1
- Connector: 1.00mm spacing between the 6pins patch seat
- Chipset: M10050(Tenth Generation Chip)
- Default Protocol: GPS, Galileo, BeiDou
- Channels: 72 Searching Channel
- Dimension: 25mm x 25mm x 6mm
- Weight: 7.3g
- Reacquisition: -160dBm
- Tracking: -162dBm
DATA AND UPDATE RATE
- Support Rate: 4800bps to 921600bps,Default 115200bps
- Data Protocol: BF4.3.X(UBLOX)/BF4.2.X(NMEA)
- Data Level: TTL or RS-232, Default TTL level
Output frequency: 1Hz-10Hz，Default 10Hz
OPERATIONAL LIMITS
- Acceleration: Less than 4g
- Altitude: 50,000m Max
- Velocity: 500m/s Max
POWER CONSUMPTION
- Operating temp: -40 °C ~ +85°C
- Storage Temp: -40°C ~ +105°C
- VCC: DC Voltage：5V
INDICATOR
- PPS LED: yellow .PPS LED is not bright when GPS is not fixed, flashing when fixed
- The Module’s Pins: TX RX GND 5V SCL SDA
IMPORTANT NOTES
- The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA protocol But there is no difference in performance between the two protocols.
Includes
- 1x Flywoo GOKU GM10 Pro V3 GPS Module w/ Compass
- 1x 150mm Cable
- 1x Copper Foil
Read More About Lipo Batteries by clicking the link below:
https://oscarliang.com/fpv-drone-guide/
Checkout our Frames Collection by clicking the link below:
https://thefpvproject.com/product-category/frames/
1S = 1 cell = 3.7V
2S = 2 cells = 7.4V
3S = 3 cells = 11.1V
4S = 4 cells = 14.8V
5S = 5 cells = 18.5V
6S = 6 cells = 22.2V
For example, we call a 14.8V battery a “4-cell” or “4S” battery.
LiPo battery is designed to operate within a safe voltage range, from 3V to 4.2V. Discharging below 3V could cause irreversible performance loss and even damage to the battery. Overcharging above 4.2V could be dangerous and eventually cause a fire.
However, it’s advisable to stop discharging when it reaches 3.5V for battery health reasons. For example for a 3S Lipo, the max voltage is 12.6V, and you should land when the voltage reaches 10.5V (at 3.5V per cell).
Reviews
There are no reviews yet.