DarwinFPV CineApe35 2006 2030KV Motor | 3.5 Inch Cinewhoop Motor | The FPV Project

The DarwinFPV CineApe35 2006 2030KV is a 3.5-inch cinewhoop motor that punches above its price point. Designed specifically for the CineApe35 and similar 3.5-inch whoop frames, it uses a DJI-inspired magnetic circuit design and a custom titanium anti-slip shaft to deliver genuinely capable performance at a cost that makes running a full set of four motors an accessible decision for any builder.

Why choose the CineApe35 2006 2030KV?

The 2006 stator is a meaningful step up from the 2004 — more winding area, more torque, and enough power to carry a full-size GoPro on a 3.5-inch build without the motor struggling at high throttle. DarwinFPV’s magnetic circuit design borrows from DJI’s material structure to improve efficiency and heat resistance — delivering better sustained performance than you’d expect at this price. Pair it with our AIO flight controller range for a complete 3.5-inch cinewhoop build.

This listing is for the 2030KV variant only.

Key features

DJI-inspired magnetic circuit design

The magnetic circuit uses the same material structure as DJI motors — improving efficiency and endurance compared to standard budget motor designs. Higher-quality magnetic materials reduce heat generation and maintain consistent output during sustained cinematic flying.

Custom titanium anti-slip stepped shaft

A custom-made titanium alloy stepped shaft provides better crash resistance than standard steel shafts, while the anti-slip design improves prop retention during aggressive manoeuvres and proximity flying.

2006 stator — GoPro-capable power

The 2006 stator offers more power than the 2004 commonly used in smaller cinewhoops — providing sufficient thrust to fly a full-size GoPro on a 3.5-inch frame without sacrificing agility or flight time.

Honest value proposition

DarwinFPV are upfront about what you’re getting — the motor is not single-stranded (a cost saving on the winding process), but the core materials — magnets, bearings, and shaft — are comparable to motors at significantly higher price points. A practical choice for pilots who crash often and need affordable replacements without sacrificing reliability.

Specifications — 2030KV

What’s in the box

• 1x DarwinFPV CineApe35 2006 2030KV motor
• 5x M2×6mm hexagon socket head screws
• 1x Sticker

Recommended for

• 3.5-inch cinewhoop builds
• DarwinFPV CineApe35 frame builds
• GoPro-carrying cinematic FPV rigs
• Pilots wanting solid performance at a budget-friendly price

Build compatibility

M2 mounting screws included — compatible with standard 3.5-inch cinewhoop frames using M2 motor mounts. Pair with components from our FPV VTX and accessories range for a complete cinewhoop build.

Note: Manufacturer thrust and current data for this motor is not published. If precise thrust figures are critical for your build, consider motors with published thrust tables. This motor is stocked for its value-to-performance ratio on 3.5-inch cinewhoop builds.