The Axisflying AE2207 V2 1960KV is a 6S 5-inch freestyle motor built to punch above its price point. Part of Axisflying’s AE series — designed from the ground up to deliver genuine performance at an accessible cost — the V2 brings a redesigned magnetic circuit, reinforced upper cover ribs, and IP53 bearing protection to one of the most popular motor formats in 5-inch FPV.
Why choose the AE2207 V2 1960KV?
The 1960KV winding is specifically suited to Juicy-style freestyle on 6S — a balanced combination of torque and RPM that keeps throttle response linear and predictable through technical manoeuvres without the snappiness of higher-KV options. The V2’s redesigned magnetic circuit improves power linearity at low throttle — one of the areas where budget motors most commonly fall short.
This listing is for the 1960KV variant only.
Key features
Redesigned V2 magnetic circuit
The updated magnetic circuit is optimised for sustained freestyle use — more linear power output across the throttle range, faster response at low throttle, and better durability through repeated high-load manoeuvres like Juicy flows, Sbang, and Bando flying.
Reinforced upper cover ribs
New upper cover rib geometry significantly improves impact resistance compared to V1, while also lowering the overall motor height — giving slightly better clearance inside tight frame builds.
IP53 BST bearing shield
Bearing Shield Technology (BST) provides IP53-rated protection against dust and light moisture — protecting the bearing from environmental contamination and extending smooth operation life over repeated sessions.
N52H arc magnets — 12N14P
N52H-grade curved arc magnets deliver strong magnetic flux with high thermal resistance — maintaining consistent performance during sustained high-current freestyle flying where lesser magnets begin to degrade.
Linear low-throttle power
The V2’s improved winding design gives more usable power at low throttle positions — important for cinematic flying and technical Juicy-style freestyle where smooth, controlled power delivery matters more than peak output.
Specifications — 1960KV
| Specification | Detail |
|---|---|
| Model | AE2207 V2 |
| KV rating | 1960KV |
| Configuration | 12N14P |
| Stator size | 22×7mm (2207) |
| Magnets | N52H arc magnets |
| Interphase resistance | 64.46mΩ |
| Input voltage | 6S LiPo |
| Max current | 38.65A |
| Max power | 902.48W |
| Max thrust | 1703g |
| Motor dimensions | Φ27.5 × 33.2mm |
| Shaft | M5 |
| Mounting | 4×M3, Φ16mm |
| Wire | AWG20, 150mm silicone |
| Weight (with wire) | 35.2g ±0.5g |
| Bearing protection | IP53 BST |
| Best suited for | 5-inch freestyle, Juicy, Bando, cinematic builds |
What’s in the box
- 1x Axisflying AE2207 V2 1960KV brushless motor
- 4x M3×8 screws
- 1x M3×4 shaft lock screw
- 1x M5 flanged nylon insert lock
- 1x O-ring
- 2x washers
Recommended for
- 5-inch freestyle builds — Juicy, Flow, Sbang, Bando
- 5-inch cinematic FPV builds
- 6S LiPo power systems
- Pilots wanting genuine performance at an accessible price
Build compatibility
Standard 16mm M3 mounting pattern — fits the vast majority of 5-inch freestyle and racing frames. Pair with props and components from our FPV accessories range for a complete build.
