The HGLRC Zeus Nano 350mW VTX is a versatile video transmitter designed for FPV drones, compatible with 16mm, 20mm, and 25.5mm mounting patterns. Here are some key features and specifications:
Key Features:
- Power Output: Switchable power output levels: 25mW, 100mW, 200mW, and 350mW.
- Frequency Channels: 40 channels, including Raceband.
- SmartAudio: Allows for remote VTX control via your transmitter, compatible with Betaflight OSD.
- Mounting Options: Compatible with 16mm, 20mm, and 25.5mm mounting patterns, making it versatile for different frames.
- Input Voltage: Wide input voltage range of 5V-25V, suitable for various power configurations.
Specifications:
- Output Power: 25mW/100mW/200mW/350mW (adjustable)
- Frequency Range: 5.8GHz, 40 channels
- Antenna Connector: U.FL
- Input Voltage: 5V-25V
- Dimensions: 16x16mm, 20x20mm, 25.5×25.5mm mounting options
- Weight: Approximately 2.3 grams (excluding antenna)
Installation Tips:
- Mounting: Choose the appropriate mounting holes (16mm, 20mm, or 25.5mm) based on your frame’s configuration.
- Power Connection: Ensure you connect the VTX to a suitable power source within the specified voltage range (5V-25V).
- Antenna: Securely attach the U.FL antenna to avoid damage or loss of signal.
- SmartAudio Setup: If using SmartAudio, configure it in Betaflight for remote control over the VTX settings.
- Cooling: Ensure adequate airflow to prevent overheating, especially when running at higher power outputs.
Configuration in Betaflight:
- Connect to Betaflight: Use a USB cable to connect your flight controller to Betaflight Configurator.
- Ports Tab: Ensure the UART connected to your VTX is configured for SmartAudio.
- Configuration Tab: Enable the VTX feature.
- Video Transmitter Tab: Set your desired frequency and power level.
Usage Tips:
- Lower Power Levels: Use 25mW or 100mW for indoor flying or close-range flights to minimize interference.
- Higher Power Levels: Use 200mW or 350mW for outdoor or long-range flights for better signal strength and range.
- Heat Management: Monitor the VTX temperature, especially at higher power settings, to avoid overheating.
By following these guidelines, you can effectively set up and use your HGLRC Zeus Nano 350mW VTX for optimal FPV performance.
Includes
- 1 x Zeus nano VTX
- 1 x ipex Linear Brass Antenna
- 1 x ipex to SMA Adapter Cable
- 6 x VTX Cable
Learn More About Carbon Fiber!
https://en.wikipedia.org/wiki/Carbon_fiber_reinforced_polymer
- Carbon fiber is a popular material choice for FPV drone frames due to its strength, durability, and lightweight properties.
- Carbon fiber frames provide a higher strength-to-weight ratio than traditional materials, resulting in better performance and maneuverability.
- Carbon fiber composites are resistant to impacts and vibrations, which helps to protect the drone’s sensitive electronics and maintain stability during flight.
- The use of carbon fiber materials in FPV drones also enables faster acceleration, higher speeds, and longer flight times, resulting in a better overall experience for the pilot.
- Carbon fiber is also an excellent thermal conductor, helping to dissipate heat generated by high-powered motors and batteries, thus preventing damage to the drone’s components.
- FPV drone enthusiasts should consider carbon fiber frames when purchasing a new drone or upgrading their existing one to achieve optimal performance and durability.
- Carbon fiber frames are available in a range of sizes and configurations, suitable for different types of drones, including racing, freestyle, and long-range drones.
- When purchasing a carbon fiber frame, consider factors such as weight, stiffness, and compatibility with other components to ensure the best performance for your FPV drone.
- Carbon fiber frames may be more expensive than other frame materials, but their long-lasting durability and performance benefits make them a worthwhile investment for serious FPV drone pilots.
- The FPV Project offers a wide range of carbon fiber frames, suitable for all types of FPV drones, ensuring that enthusiasts have access to the latest technology and the best possible flying experience.
An FPV drone frame is the backbone of your drone’s build, providing stability and structure for the rest of the components. At the FPV Project, we offer a wide range of FPV drone frames for sale that cater to both beginners and seasoned pilots, providing a foundation for building high-performance racing and freestyle drones. With our selection of FPV frames, you can customize and build your drone to your exact specifications and take your flying skills to the next level.
Reviews
There are no reviews yet.