Ultimate Guide to Flywoo X30 Waterproof Superhydrophobic Invisible Spray

Introduction to Flywoo X30

The Flywoo X30 Waterproof Superhydrophobic Invisible Spray is an advanced solution designed to protect a wide range of surfaces from water damage. By leveraging cutting-edge nanotechnology, this spray forms an invisible barrier that repels water and other liquids, providing unparalleled protection and longevity to your valuable items.

Key Features and Benefits

Superior Water Resistance

The Flywoo X30 Spray offers exceptional water resistance, ensuring that treated surfaces remain dry even in the harshest conditions. This spray is perfect for outdoor gear, electronics, and any items prone to water exposure.

Long-Lasting Protection

Once applied, the Flywoo X30 forms a durable layer that provides long-lasting protection. This means less frequent reapplications, saving time and resources in the long run.

Versatile Application

Suitable for a variety of surfaces, including fabric, leather, metal, and plastic, the Flywoo X30 is a versatile solution for all your waterproofing needs. Whether it’s your favorite pair of shoes or your high-tech gadgets, this spray has you covered.

Invisible Coating

One of the standout features of the Flywoo X30 is its invisible coating. This means that the appearance of your items remains unchanged, while they gain superior water-resistant properties. The spray dries clear and leaves no residue.

Description:

Flywoo X30 Waterproof Superhydrophobic Invisible Spray creates an effective waterproof coating for electronic modules, meeting nearly all your needs. Positioned to provide daily waterproofing for drones most easily.

Superhydrophobic materials are ideal materials used in electronic products for waterproofing. The superhydrophobic material resembles the surface of a lotus leaf. Due to its unique repellency to water or water vapor, superhydrophobic materials have inherent and natural functions of preventing water, moisture, salt spray, mold, dust, corrosion, short circuit, etc.

With just a simple spray, a highly effective waterproof coating is formed within 2-3 minutes, allowing your electronic products to withstand water splashes and remain usable even on rainy days.

Operating Instructions:

Cleaning: Before the coating operation, make sure to thoroughly remove the dust and oil stains on the substrate surface.
Maintenance or recoating: This product has excellent recoating performance. If re-coating is needed, clean the surface and reapply directly at the corresponding position.
(Note:
1-Allow each layer to dry before applying the next one.
2-To achieve the best waterproof effect, it is recommended to spray repeatedly for 2 – 3 times.
3-Before use, please shake it to maintain the uniformity of the liquid)
4-After spraying, the surface drying time is approximately 2 – 3 minutes. The surface can meet daily use requirements after drying.
5-Don’t let your circuit board be immersed in water for long when powered on.
6-use a dedicated circuit board cleaning solution to thoroughly clean the board

Application Scope:

●Covering all circuit boards (Flight Controller, Electronic Speed Controller, Video Transmitter, O3, etc.)

●Glass materials such as lenses (Can effectively prevent water droplets from adhering, but it will reduce the permeability by 30%. If dissatisfied after application, it can be wiped clean)

●Plugs on all circuit boards

●Plugs on the battery

Specifications:

Product Name: Flywoo X30 Waterproof Superhydrophobic Invisible Spray
Capacity: 56.7g (For example: Flywoo GOKU F722 PRO Mini V2 20X20 Flight Controller double-sided spray 3 times, need to use 2.5g)
Color: Milky white
Relative density (g/cm³, 25℃) : 1.56 ± 0.3
Water repellency angle：>160°
Material: Superhydrophobic material
Volatility: Non-volatile
Purpose: Used for waterproofing, short-circuit prevention, corrosion resistance, salt spray protection, mold resistance, dust prevention, and heat dissipation in electronic products.
Weight：67.2g

Flywoo X30 Conformal PCBA Waterproof

Long-lasting Protection of Flywoo X30 Waterproof Spray

When the coating remains undamaged (after spraying and in a static state), it has been tested by Huawei and Midea and the protection effect lasts for up to 8 years. When sprayed on drones, as impacts and other accidents may occur during flight and damage the coating, we recommend re-spraying before each flight

Excellent Facilitation for FPV Pilots to Repair

Flywoo X30 waterproof spray simplifies circuit board repair for FPV pilots compared to traditional three-proof paints with reapplication of protection after component replacement.

Excellent Safety

The Flywoo X30 waterproof spray is an environmentally friendly product that does not contain harmful substances. However, traditional three-proof paints may release volatile organic compounds (VOCs), which have certain impacts on the environment and human health.

Comparison to Traditional Conformal Coatings

The protective performance of the three-proof paint relies largely on the compactness of the coating. This is also the focus of the research and development for three-proof paint manufacturers. Moreover, the super-hydrophobic coating inherently possesses natural characteristics such as waterproofing, anti-short circuit, anti-corrosion, anti-salt spray, anti-mold, and anti-dust. Consequently, superhydrophobic materials are ideal alternatives to conformal coatings!

The needs of the electronics industry	Superhydrophobic Coating	Conformal Coating
waterproof	The biggest feature of superhydrophobic is waterproof	Depends on coating density
Short circuit prevention	Excellent anti-short circuit characteristics due to repellency of water / moisture / corrosive liquids	Depends on coating density
Corrosion protection	Natural repellency of water or corrosive liquids for excellent corrosion protection properties	Depends on coating density
saltfog-proof	Excellent anti-salt spray properties due to natural repellency of salt spray	Depends on coating density
fungi-proof	Hydrophobic and dry surface will not harbor bacteria	Adding anti-mold additives, which will affect the compactness of the coating
dustproof	Self-cleaning effect similar to lotus leaf to prevent dust	No dustproof effect
radiating	Inorganic-organic composite coating to improve heat dissipation	Poor heat dissipation of polymer materials

Excellent Performance Parameters

The super-hydrophobic coating has been tested on the PCB circuit board of Huawei’s 5G base station. It has undergone three rounds of tests before and after, and its performance is significantly superior to that of 3M’s conformal paint.

Huawei Case: Super Hydrophobic VS 3M Conformal Coating

Comparison Items	Our Superhydrophobic Coating	3M Conformal Paint
Thickness	~20µm	~40µm
Contact Angle	160°	80°
Wettability (water)	Completely non-wetting	Semi-immersion
Wet and Dry Cycle	No change in contact angle after 1000 times	After 100 times, the contact angle becomes 30°
Salt Spray Performance	1000 h	500h
Adhesion Level	0 level	0
Anti-short Circuit Time (Accelerated Test in a Salt Spray Chamber)	1500h	1000h

Based on the comparison above, this superhydrophobic coating clearly outperforms 3M’s conformal coating in various performance metrics, including:

1. Thinner coating thickness – The superhydrophobic coating only requires 20-50 μm, compared to 40-120 μm for the traditional conformal coating.

2. Higher hydrophobicity – The superhydrophobic coating has a contact angle of 160°, while the 3M coating is only 80°, indicating much stronger water repellency.

3. Superior durability – After 1000 wet-dry cycles, the superhydrophobic coating maintained its contact angle, whereas the 3M coating dropped to 30° after just 100 cycles.

4. Enhanced anti-corrosion and anti-short circuit performance – The superhydrophobic coating achieved 1000 hours of salt spray resistance and 1500 hours of anti-short circuit time, outperforming the 3M coating’s 500 hours and 1000 hours respectively.

These significant advantages make the superhydrophobic coating an ideal protective solution for the electronics industry. Its combination of thin profile, extreme water repellency, and outstanding durability and protective capabilities make it a superior alternative to traditional conformal coatings.

Excellent heat dissipation

The thickness of conventional conformal paint is 40 – 120µm, but our super-hydrophobic coating only needs 20 – 50µm.

Resin Type	Acrylic Resin	Epoxy Resin	Silicone Resin	Polyurethane Resin	p-xylene	Our Superhydrophobic Materials
Thermal Conductivity (W/mk)	0.2 – 0.8	0.2 – 1	0.8 – 1.2	0.35 – 1.1	0.2 – 0.5	3.3
Thermal Resistance (10⁻⁴m²K/W)	1 – 4	0.8 – 4	0.6 – 1	0.7 – 2.2	1.6 – 4	0.1

The data comparison indicates that our superhydrophobic material has an impressive thermal conductivity of 3.3 W/mK, which is significantly higher than common resin-based coatings. Additionally, its thermal resistance is only 0.1 x 10⁻⁴m²K/W, far superior to other materials.

This means that, compared to traditional coatings, our superhydrophobic coating can more effectively aid in heat dissipation for electronic devices, thereby enhancing overall thermal performance. This is particularly crucial for high-power electronic products.

In summary, with its excellent thermal conduction properties, our superhydrophobic coating can provide superior heat dissipation for electronic products, making it an ideal protective solution.

China CNAS has tested this product, and all harmful substances do not exceed the standard.

Read More About Lipo Batteries by clicking the link below:
https://oscarliang.com/fpv-drone-guide/

Checkout our Frames Collection by clicking the link below:
https://thefpvproject.com/product-category/frames/

1S = 1 cell = 3.7V
2S = 2 cells = 7.4V
3S = 3 cells = 11.1V
4S = 4 cells = 14.8V
5S = 5 cells = 18.5V
6S = 6 cells = 22.2V

For example, we call a 14.8V battery a “4-cell” or “4S” battery.

LiPo battery is designed to operate within a safe voltage range, from 3V to 4.2V. Discharging below 3V could cause irreversible performance loss and even damage to the battery. Overcharging above 4.2V could be dangerous and eventually cause a fire.

However, it’s advisable to stop discharging when it reaches 3.5V for battery health reasons. For example for a 3S Lipo, the max voltage is 12.6V, and you should land when the voltage reaches 10.5V (at 3.5V per cell).

Weight	0.15 kg
Dimensions	18 × 10 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “Flywoo X30 Conformal PCBA Waterproof Superhydrophobic Invisible Spray”

Flywoo X30 Conformal PCBA Waterproof Superhydrophobic Invisible Spray