The Hobbywing XRotor 2807 1300KV is a high-efficiency brushless motor purpose-built for 7-inch FPV drones running 4-6S LiPo. Designed for long-range and heavy-lift cinematic builds, it combines a robust 7075 aluminium bell with an active-cooling rotor structure to deliver strong, sustained thrust without overheating on demanding flights.
Why choose the XRotor 2807 1300KV?
The 2807 series is engineered for heavy-load efficiency, offering noticeably better performance in the mid-to-high throttle range compared to motors with similar specs from other brands. This makes it a strong choice for long-range pilots and cinematic sUAS builds where consistent thrust and thermal stability matter more than outright speed.
Whether you’re building a 7-inch long-range explorer or a heavier cinematic rig, the 1300KV winding gives you the torque needed to carry larger props and payloads efficiently on 4-6S power. Pair it with components from our flight controller and ESC range for a complete propulsion stack.
Key features
Heavy-load optimised efficiency
The 2807 uses 0.2mm silicon steel laminations and a heavy-load optimised winding design, improving efficiency in the mid-to-rear throttle range — critical for long-range missions where every milliamp of battery extends flight time.
Active cooling structure
An active air-flow cooling design at the motor bell significantly improves heat dissipation during sustained high-throttle flight, helping the motor maintain consistent performance on longer flights.
Durable build quality
Constructed with a 7075 aluminium motor bell and a titanium alloy hollow shaft, the 2807 is built to handle repeated hard landings and heavy-prop loads without bell deformation or shaft bending.
Anti-slip prop mount
A grooved mounting surface locks propellers firmly in place during high-torque manoeuvres, reducing the risk of prop slip on aggressive throttle punches.
High-temperature winding
Winding wire rated up to 220°C ensures reliable performance even under sustained electrical load, reducing the risk of winding damage on hot, high-current flights.
Specifications — 1300KV
| Specification | Detail |
|---|---|
| KV rating | 1300KV |
| Rated voltage | 4-6S LiPo |
| Max continuous current | 56.7A / 9s |
| Max continuous power | 1361W / 9s |
| Max thrust | up to 2818g |
| Motor weight | ~59g |
| Internal resistance | ~53.8mΩ |
| Shaft | D5 + M5, titanium alloy hollow shaft |
| Mounting screws | 4×M3, Φ19mm pattern |
| Recommended ESC | XRotor FPV G2 65A 4-in-1 |
| Recommended props | HQ7x4x3 to HQ9x5x3 |
| Bell material | 7075 aluminium |
| Best suited for | 7-inch long-range and cinematic FPV builds |
Recommended for
- 7-inch long-range FPV builds
- Cinematic heavy-lift FPV rigs
- Light sUAS / survey platforms
- 4-6S LiPo power systems
Build compatibility
The XRotor 2807 1300KV pairs well with our FPV VTX collection for complete long-range digital or analog builds. For ESC pairing guidance, refer to the official Hobbywing XRotor 2807 technical documentation.
